How to replace the door induction magnet?
Time:2025-02-07
Views:109
Today, I will tell you about the general steps to replace the door induction magnet:

1. Preparation:
Confirm the model and specification: according to the type of door, the use of the environment, determine the required door induction magnet model, size and magnetic strength and other parameters to ensure that the new magnet can be adapted.
Tools: Usually, tools such as screwdrivers, wrenches, and tweezers must be prepared. In some cases, cleaning agents, towels, flashlights, and insulation torque screwdrivers may also be required.
2. Remove old magnets:
Find the magnet location: commonly found next to the door hinge or inside the door, need to look carefully.
Remove the fixing device: If the screw is fixed, remove the screw with a screwdriver and place it properly to avoid loss; If the buckle or paste is fixed, carefully pry or tear, but be careful not to damage the door body and surrounding parts.
Remove the old magnet: After the screw is removed, hold the bottom metal part of the magnet and push it upward to remove it; If the paste is firm, it can be gently removed with the assistance of tweezers and other tools.
3. Install new magnets:
Clean the installation location: Use detergent and towels to remove dust, dirt, grease and other debris in the installation location to ensure that the surface is clean and smooth, so that the new magnet is firmly attached.
Install a new magnet: Gently push or press the new magnet to fix it in place, and then reinstall the fixed device such as the metal mounting plate. Tighten the screws with a screwdriver, but do not overtighten it to avoid damaging the magnet.
4. Test and inspection:
Check the installation effect: After the installation is complete, check whether the magnet is firmly installed, whether the position is accurate, and whether the appearance is damaged.
Test the induction function: close and open the door to observe whether the door magnetic induction system can work normally. If there is a problem, check and adjust it in time.
The above is the content of Xiaobian, I do not know if it will help you.