Magnet can so play?Custom shaped magnet practical skills

Recently, many customers have come to ask: "I want to customize a magnet of a special shape. What should I pay attention to?" Today, I‘m going to share with you all the valuable insights I‘ve accumulated over the years. I guarantee you won‘t fall into any traps after reading it!

Let‘s first talk about the several places where problems are most likely to occur:

1. Like Ndfeb this material, too complex shape can not be done, forced to do the price can be doubled

2. If you insist on a complex shape, you can consider injection-molded magnets, but the magnetic force will be a bit weaker

3. It is suggested that you first send the design drawings to the supplier for a look. Don‘t just keep drawing for a long time without getting it done

1. Just like charging a cell phone requires alignment, the pole orientation of a magnet is important

2. Especially the arc or polygon magnet, the magnetization direction is wrong to install it is waste

3. It would be best to ask the supplier to provide a magnetic field simulation diagram so that it can be seen clearly

1. Common neodymium iron boron for high-temperature environments? Demagnetization will be shown to you in no time!

2. Remember to carry out anti-rust treatment in damp environments, especially at the corners and edges

3. In areas with significant vibration, materials with good toughness should be selected

1. It is normal that the first proofing cost is high, and mass production is cheaper

2. Be careful if it‘s too cheap. It might be made of recycled materials

3. Ask clearly whether the quotation includes mold fees and inspection fees

1.Irregular-shaped magnets are not always in stock like standard products

2.At least 4 to 6 weeks should be reserved from mold opening to mass production

3.For those in urgent need, it is recommended to ask about the inventory situation first

Finally, here is a practical suggestion: Provide the supplier with your specific requirements (such as the product it will be used for, the working environment, and the required suction power, etc.) in detail so that they can offer the most suitable solution. We often encounter situations where customers spend a long time figuring things out on their own, only to find a simpler and cheaper solution at a glance by professional engineers.

Remember: Good customization is not about being more complex, but about just meeting the requirements! If you have any specific questions, feel free to chat at any time. We guarantee to give you reliable advice!